Key Features:

Zero Loss Technology defined: Allnic Audio’s specialty technology for eliminating audio cable signal loss by minimizing three resistances: Linkage Resistance, Contact Resistance, and Wire Resistance.

Linkage Resistance minimized: Allnic uses 1000 °C hot melt welding of cable terminations and wire; no solder, no clamps.

Contact Resistance minimized: three innovative contact improvement methods, one each for our power cables, speaker cables, and interconnect cables. Furthermore, Allnic does proper heat treatment for longer contact pressure and uses Allnic’s patented double-bladed spade speaker terminations. Every termination for XLR, RCA, and banana is split into multi-faces with an inner elastomer core that constantly applies outward pressure to those faces.

Wire Resistance optimized: After incessant technical test and listening sessions, we have found the optimum thickness of wire for each type of cable.

MRCT®. Mid-Range Control Technology: Allnic considers that an exaggerated, protruding mid-range is the most formidable obstacle to harmonious signal transfer. Allnic’s MRCT uses metal platings for slight mid-range “braking” and heavier wire gauges for low frequency transmission, and controls capacitance to ensure usually evasive superbly realistic high frequency reproduction.

Mu-metal shield: All other audio cable manufacturers use copper and/or silver shielding for signal cables. These are effective only for electrically induced noise, not for magnetically caused noise. Allnic uses Mu-metal as its braided shield for all Allnic’s interconnect, digital and phono cables. Mu-metal shielding provides complete protection from all electromagnetic noise, a world-premiere in the audio industry.

Standard length: 1.0m, contact for custom length pricing ($200/0.5m)

Recommend Unbalanced cables for unbalanced component circuitry design. Balanced cables for components with true balanced circuit design.

I personally use a 36 foot run from an unbalanced OTL/OCL preamp to monoblocks. Length is not an issue with these cables.

Mu-7R RCA Cable

$2,415.00

Quantity

http://www.audiophilia.com/reviews/2019/6/4/allnic-audio-mu-7r-rca-cable

https://www.hifiplus.com/articles/allnic-mu-7r-and-zl-3000-cables/

http://www.theaudiobeat.com/equipment/allnic_audio_int_sc.htm

http://6moons.com/audioreviews2/allnic3/1.html

http://www.6moons.com/audioreviews2/allnic/2.html
We are offering the Allnic ZL cables with FREE SHIPPING AND A 28-DAY NO-HASSLE RETURN policy, meaning on delivery you have 4 weeks to burn in and enjoy the cable. I only ask that you return them in a like-new condition so they can be re-sold.

TRADE-INS CONSIDERED. BULK DISCOUNT OFFERED.
WE SHIP WORLD-WIDE.

No return on custom orders, sale, demo, discontinued items. Full factory
warranty with new and demo items. Resale items are sold as-is, no warranty.
1. Barrier free conductors

Traditional soldered or clamped connections between terminations and conductor create two resistant barriers (solder has much greater resistance than copper or silver). Our direct, high temperature melt welding (1000o C), without solder, removes two obstacles in the signal path by melting terminations and wire conductors into a single, seamless material.

2. Permanent contact pressure via heat-treated beryllium-copper terminations

Contact resistance is a critical factor for signal transmission. Higher contact pressure and a larger contact surface mean less contact resistance and better signal transfer. Traditional bronze, pure copper and phosphorous-copper terminations cannot provide sufficiently secure and long-lasting contact pressure. Our precision-milled, slit, heat-treated beryllium-copper terminations provide maximum contact surface and powerful contact pressure for minimal signal loss – for life.

3. No more loosened binding posts

With our patented double-bladed speaker terminations, there is no need to go behind your loud speakers every month to re-tighten binding posts. Our unique double-bladed spade terminations minimize contact resistance and will not loosen, even when subjected to severe speaker vibration: no need to re-tighten binding posts for years.

4. Mid-Range Control Technology – MRCT®

Allnic considers an exaggerated midrange to be a clear indicator of inaccurate signal transfer through a cable, and the most formidable distortion to overcome in cable design. Allnic’s MRCT is the result of meticulous listening and measurements to select carefully formulated metal plating for slight midrange “braking” and heavier wire gauges for accurate low frequencies, as well as to ensure control of capacitance for provision of stunningly realistic high frequencies.

5. Mu-metal shielding for true protection from EMI

While all other audio cable manufacturers use copper and/or silver shields for signal cables, Allnic uses ‘Mu-metal’ as braided shield for its interconnect and digital cables (RCA & XLR) – a world-premiere in the audio industry.

Traditional copper and/or silver mesh shields provide effective protection against electrically generated noise, but they are ineffective against magnetically induced noise. This is because magnetically generated interference freely penetrates both copper and silver. Only Mu-metal (a nickel alloy material) can protect the audio signal from both electronically and magnetically induced noise. Test data show that Mu-metal shielding reduces electromagnetic noise to less than 1/30th of what braided copper shield allows, down -30dB in comparison.

Mu-7R RCA Cable

Reviews

Term and Conditions

Design Features:

Kevalin Audio Terms of Sale Agreement